Pubblicazioni/Publications

1 – Goli G., Negri M., Marchal R., Larricq (1997) The machining process of the european douglas fir: The surface quality ICFWST’97 Proceedings vol. II pag. 473 – Belgrado (Serbia) 29 set. – 3 ott. 1997. Scarica/Download

2 – Goli. G., Negri M. Qualificazione del legname trentino – Seconde lavorazioni: qualità delle superfici lavorate del legno di Abete Rosso Consiglio Nazionale delle Ricerche, Istituto per la Tecnologia del Legno.

3 – Bonamini G, Collet R., Del Taglia A., Fibbi F., Goli G., Remorini R., Uzielli L. (1999) Equipement and test method for measuring cutting forces and wear of cutting edges in saw teeth for wood, improved with new HVOF coatings IWMS 14 Proceedings, vol. I pag. 453 – Paris, Epinal, Cluny (France) 12,19 sett. 1999. Scarica/Download

4 – Negri M., Goli G. (2001) Qualità delle superfici lavorate del legno di Abete rosso e di Douglasia valutata con una opportuna classificazione visualeLegno Cellulosa Carta, VI, 1,10-21. Scarica/Download

5 – Goli G., Larricq P., Marchal R., Negri M., J. P. Costes (2001) Surface quality: comparison among visual grading and 3D roughness measuments IWMS 15 Proceedings, pag. 459 – Los Angeles (USA) 30/07 – 01/08 2001. Scarica/Download

6 – Goli G., Marchal R., Negri M. (2001) Industrial machining of Douglas fir with various tools and materials IWMS 15 Proceedings, pag. 173 – Los Angeles (USA) 30/07 – 01/08. 2001. Scarica/Download

7 – Goli G., Bleron L., Marchal R., Uzielli L., Negri M. (2002) Surfaces Formation and Quality, in Moulding Wood at Various Grain Angles. Initial Results with Douglas Fir and Oak Wood Structure and Properties 2002 Proceedings,pag – Brezno (Slovakia) 1/9 – 3/9. 2002. Scarica/Download

8 – Goli G., Bleron L., Marchal R., Uzielli L., Negri M. (2002) Measurement of Cutting Forces, in Moulding Wood at Various Grain Angles. Initial Results With Douglas Fir Wood Science and engineering in the third millennium Proceedings, pag. 123 – Brasov (Romania) 20-22/11/2002. Scarica/Download

9 – Svoradova M., Bléron L. Marchal R., Goli G. Cottin. F. (2002) Influence of Wood Exctractibles on the Gluing Quality in Oak LVL Wood Science and engineering in the third millennium Proceedings, pag. 370 – Brasov (Romania) 20/22/11/2002. Scarica/Download

10 – Goli G. Marchal R., Uzielli L., Negri M. (2003) Measuring cutting forces in routing wood at various grain angles. Study and comparison between up- and down-milling techniques, processing douglas fir and oak IWMS 16 Proceedings, pag. 127 – Matsue (Japan) 24-30/08/2003. Scarica/Download

11 – Chala A., Chekour L., Nouveau C., Djouadi A., Goli G. (2003) Duplex treatment based on the combination of ion nitridingand adn pva process: application in wood machining IWMS 16 Proceedings, pag. 471 – Matsue (Japan) 24-30/08/2003. Scarica/Download

12 – Pinheiro D., Goli G., Viera M. T. (2003) Cutting tools edge evolution of coated and uncoated tungsten carbide inserts. IWMS 16 out of Proceedings, Matsue (Japan) 24-30/08/2003. Scarica/Download

13 – Goli G., Marchal. R., Uzielli L. (2003): Generalità su irregolarità e difetti Xylon, Ottobre-Novembre n°8 pag 72-80. Scarica/Download

14 – Goli G., Marchal R., Uzielli L. Classificazione qualitativa dei difetti con metodo visuale di prossima pubblicazione sulla rivista Xylon. Scarica/Download

15 – Goli G., Marchal R., Uzielli L. Meccaniche di Formazione delle superfici di prossima pubblicazione sulla rivista Xylon. Scarica/Download

16 – Goli G., Marchal R. (2004): Usinabilité du Douglas 1ière Assises Nationales du Douglas, 21-22 octobre Tulle (Fr). Scarica/Download

17 – Goli G. (2004): Superficie del legno ottenuta mediante fresatura: studio delle meccaniche di formazione e dei relativi difetti – Surfaces du bois obtenues par defonçage: étude de la mécanique de formation et des défauts induits. Tesi di dottorato – Thèse doctorale; Università di Firenze – Ecole Nationale Supérieure d’Arts et Métiers Cluny, Firenze 26/11.

18 – Goli G., Marchal R., Uzielli L. (2004): Classification of wood surface defects according to their mechanical formation during machining; proc. 2nd International Symposium on Wood Machining, Vienna (AT), pag. 315-325. Scarica/Download

19 – Goli G., Uzielli L. (2004): Formation and quality of wood surfaces processed by turning tool, a global approach; proc. 2nd International Symposium on Wood Machining, Vienna (AT), pag. 451-456.
Scarica/Download

20 – Goli G. (2004): Produzione integrata da calcolatore. Legnolegno News settembre, n° 11, pag. 21-24.

21 – Goli G. (2004): Un’analisi dei software per la produzione di infissi. Legnolegno News settembre, n° 11, pag. 21-24

22 – Goli G. (2004): Superfici lavorate per asportazione di truciolo: analisi dei difetti. Legnolegno News settembre, n° 11, pag. 21-24.

23 – Goli G. (2005): Wood Processing: a contribute to the interpretation of surface origin according to grain orientation. IWMS 17 Proceedings, Rosenheim (D) 26-28/08. Scarica/Download

24 – Goli G., Fioravanti M., Del Taglia A. (2006): Chip formation processing wood with different grain orientations using low speed free orthogonal cutting technique. Proccedings of the International conference on Integrated approach to wood structure, behaviour and applications (joint meeting of ESWM and COST Action E35), Florence, May 15-17/2006, pp. 291-299.

25 – Goli G. (2006): Il software libero, potenizalità per gli studi professionali. Agronomi e Forestali n.6/06, pp. 14-17.

26 – Goli G. (2006): I vantaggi del software libero. La gestione integrata del processo produttivo con sistemi dinamici basati sul web e sul software libero, l’esperienza di G3 Fantacci. Xylon 06/2006, pp. 62-66.

27 – Goli G., Wyeth D., Atkins A., Jeronimidis J., Fioravanti M. (2007): Orthogonal cutting of wood at high speed using a modified split Hopkinson bar and a high speed camera. Proceedings of the third International Symposium on Wood Machining, 21-23 May 2007, Lausanne (CH), pp. 35-38

28 – Goli G., Wyeth D., Atkins A., Jeronimidis J., Fioravanti M. (2007): Friction in orthogonal cutting of Douglas fir at varying grain orientations: measurements and consequences. Proceedings of the third International Symposium on Wood Machining, 21-23 May 2007, Lausanne (CH), pp. 139-142.

29 – Goli G., Wyeth D., Atkins A.G., Jeronimidis G., Fioravanti M., Del Taglia A. (2007): Chip formation in wood cutting with different grain orientations using high and low cutting speeds. 8th A.I.Te.M. Conference proceedings, 10-12 September 2007, pp. 57-58, complete paper on CD-ROM. ISBN 88-7957-264-4. Scarica/Download

30 – Aknouche H.,  Sandak J.,  Goli G.,  Negri M. (2008): Comparison of the surface final quality when routing with different materials measured using non-contact laser sensors on Aleppo Pine (Pinus halepensis Mill.) wheels.1ier Colloque Euromaghrébin sur les Bois Méditerranéens – Caractérisation et valorisation technologique des bois résineux méditerranéens, Université M’Hamed Bougara, Boumerdès (Algérie), 30th March – 2nd April 2008.

31 – Wyeth D. J., Goli G.,  Atkins A. G. (2009): Fracture toughness, chip types and the mechanics of cutting wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture. Holzforschung. Volume 63, Issue 2, Pages 168–180, ISSN (Online) 1437-434X, ISSN (Print) 0018-3830, DOI: 10.1515/HF.2009.017, Available online: 28/11/2008, March 2009.

32 – Fioravanti M., Mazzanti P., Goli G., Rossi Rognoni G., Sodini N. (2008): Physical and mechanical characterization of ancient wooden musical instruments for their conservation. COST Action IE0601 / ESWM – International Conference 5-7 November 2008 – Braga (Portugal).

33 – Wyeth, D. J., Goli, G., & Atkins, A. G. (2009). Fracture toughness, chip types and the mechanics of cutting wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture. Holzforschung, 63 (2), 168-180. DOI: 10.1515/HF.2009.017. Permalink

34 – Goli, G., Fioravanti, M., Marchal, R., Uzielli, L. (2009). Up-milling and down-milling wood with different grain orientations – theoretical background and general  appearance of the chips. Holz als Roh- und Werkstoff, 67 (3), 257-263. Permalink


Goli, G., Fioravanti, M., Marchal, R., & Uzielli, L. (2009). Up-milling and down-milling wood with different grain orientations – theoretical background and general appearance of the chips. Holz als Roh- und Werkstoff, 67 (3), 257-263.